January 9, 2015
Register Now for the January 13 DFMStream Webinar
Wednesday, January 07, 2015 | DownStream Technologies

At this webinar, attendees will learn about DFMStream, the new product from DownStream Technologies that provides powerful DFM capabilities in an easy-to- use environment. DFMStream bridges the gap between engineering and fabrication, helps save valuable time and reduces bottlenecks.

The Webinar will demonstrate the Design Analyzer, the new Paste Mask analysis, new features available in Streams Rule Checking, and all the new checks we have developed and announced in Release 11...

January 8, 2015

INLYNK, a premier software solutions provider for the electronics industry, has released version 4.3 of its flagship product. Optymo is a sophisticated BOM and parts management solution that helps organizations to better manage their design and production steps. This new version is the result of a very successful collaboration between Altium, Octopart and INLYNK.

...
January 7, 2015
IEEE to Adopt the HDBaseT Standard
Wednesday, January 07, 2015 | BUSINESS WIRE

The HDBaseT Alliance, the cross-industry group tasked with promoting and advancing HDBaseT standard, and IEEE, the world’s largest professional organization advancing technology for humanity, today announced the HDBaseT Specifications 1.1.0 and 2.0 have been approved by the IEEE Standards Association (IEEE-SA) Standards Board for adoption as part of the organization’s standard portfolio.

HDBaseT is a successful technology for long-distance ultra-high definition distribution of digital media today,...

January 6, 2015

Mentor Graphics Corp. has announced the latest release of FloEFD, its computational fluid dynamics (CFD) software. The new release provides advanced capabilities and functions that let designers and analysts create more realistic operating environments and models for improved simulation accuracy.  New features include a sliding mesh model for rotating equipment such as pumps, fans, and blowers; water film simulation to calculate surface condensation and icing film thickness; together with radiation and lighting enhancements. These new capabilities support automotive industry initiatives for developing state of the art lighting products as well as enabling manufacturers to design better pumps, fans and blowers.  ...

January 5, 2015

Electronic Design and Microwaves&RF are providing a webcast discussing PCB materials, simulations, and measurements for 32 Gb/s.  

Why this Webcast is Important:

Breaking the 32 Gb/s barrier for printed circuit board (PCB) channels requires a strong understanding of PCB stack-up design, simulation methods, and measurement techniques.  How a PCB fabrication document calls out the materials, such as fiber weave and surface roughness, is critical to high speed performance.  Accuracies of channel performance time and frequency domain simulations at the higher data rates require knowledge of as-fabricated material properties and tolerances.  Design and measurement of test...

January 2, 2015

Zuken is pleased to announce that the electric vehicle research project in which they are a partner--EM4EM (ElectroMagnetic Reliability and Electronic Systems for Electro Mobility)--has won a European innovation award.

...

December 29, 2014

The EDA Consortium (EDAC) Market Statistics Service (MSS) announced that the Electronic Design Automation (EDA) industry revenue increased 6.3% for Q2 2014 to $1757.9 million, compared to $1653.4 million in Q2 2013.

Sequential EDA revenue for Q2 2014 increased 0.7% compared to Q1 2014, while the four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 5.8%.

“Double-digit increases in PCB/MCM and Semiconductor IP led the way to an overall increase in industry revenue for Q2,” said Walden C. Rhines, board sponsor for the EDAC MSS and chairman and CEO of Mentor Graphics. “Geographically, all regions except...

July 12, 2013

PCB layout begins with a schematic. The schematic can be a simple paper drawing on simple boards or captured in a CAD program for more complex boards. The connections on the PCB should be identical to the schematic, but while the schematic is arranged to be readable, the PCB layout is arranged to be functional. As a result, there is rarely any visible correlation between the schematic and the layout.

PCB layout can be performed manually (using a CAD tool such as Altium Designer, PADs, or Allegro), or in combination with an Autorouter. The best results are usually achieved using or manual ...

July 12, 2013

The Dilemma

PCB Layout CAD software programs are undergoing dramatic and significant changes as companies release new versions at an increasingly rapid rate. These new versions not only fix bugs, but they add additional features and versatility. Altium Designer is arguably the fastest up and coming CAD tool on the market. This product was designed to unify the entire design process. Altium offers:

A single solution to develop hardware, programmable hardware and software Take designs from concept to manufacture within a single unified environment A single model of the design data, and a single design data storage system

As more and more companies are purchasing and using Altium Designer for their PCB...

Pages

Subscribe to 911EDA PCB Layout Services Industry News

AltiumMentor GraphicsCadenceOrCAD